-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
30
1
0
HP Recommended
HP Laserjet Pro 200 model M276mw - out of warranty, so no HP support....
Problem is missing and/or faded printing on the left half of all documents, whether printing or copying, same results.
images attached.
1. replaced all 4 toner cartridges with new ones
2. cleaned and inspected the transfer belt...no obvious issues
Any ideas what could cause this to happen suddenly? Advice appreciated.
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Is the print on the edges of the blank areas well bonded? This almost looks like it could be some sort of fuser issue. That there is toner there on the cleaning page suggests a possible issue with something in the color, but as you say you have already replaced the toner cartridges. Open the back door and look at the roller that is mounted in the back door, is it clean or polluted with toner?
If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
HP Recommended
Is the print on the edges of the blank areas well bonded? This almost looks like it could be some sort of fuser issue. That there is toner there on the cleaning page suggests a possible issue with something in the color, but as you say you have already replaced the toner cartridges. Open the back door and look at the roller that is mounted in the back door, is it clean or polluted with toner?
If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
30
1
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community