M806 Stacker 'Left Bins Full' problem

BDurham · ‎05-19-2020

Hi -

On my M806 with the stacker/stapler installed I get a message that I don't get on my other M806.

Stacker/Stapler is set to stacker, not mailbox by-the way.

I print about 300-350 pages, stapled. 2.5 inches goes to one bin, 2.5 inches to the other output bin and then gives a message: "Left bins full."

After I clear the output bins printing resumes.

Any hints? My other M806 doesn't do this.

I'm only asking because the other M806 prints a much larger stack of stapled paperwork.

I'm thinking this is supposed to be a feature but I would like to print a larger stack of stapled paperwork.

We had the engine on this one replaced recently - besides this it's working great.

Thanks for any ideas -

Brian

Repairatrooper · ‎05-19-2020

Check the firmware versions and also the driver revisions you re using.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Create an account on the HP Community to personalize your profile and ask a question