Solved: Re: MFP M277 dw does not print duplex automatically [SOLVED] - HP Support Community

TokoWieme · ‎01-02-2017

I have a Laserjet Pro MFP M277 dw and after installing the printer an drivers on a new PC, I can no longer print duplex automatically. I can only opt for the manual duplex printing in the printing preferences.

The printer is connected to the PC via Wifi.

ShlomiL · ‎01-02-2017

Hi,
Make sure the Automatic Duplexing option is enabled:

Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.

Now Automatic Duplexing should become available.

Regards,
Shlomi

Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

View solution in original post

ShlomiL · ‎01-02-2017

Hi,
Make sure the Automatic Duplexing option is enabled:

Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.

Now Automatic Duplexing should become available.

Regards,
Shlomi

Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

TokoWieme · ‎01-03-2017

THanks. That did the trick.

gael33 · ‎08-06-2017

Okay, I had to uninstall the printer and then reinstall with the downloaded drivers from the HP site. Once that was done I went into Control Panel - Devices & Printers and changed the settings which has proved successful.

gael is happy 🙂

ITS-AG · ‎05-28-2019

Thank you for a useful tip. It worked.

MFP M277 dw does not print duplex automatically

Create an account on the HP Community to personalize your profile and ask a question