Network printing issues

[Utpal71]

My HP MFP M130a laser printer has unique problem. It prints fine when connected locally. But has problem printing via network.

It won't print from network unless at least one page is printed locally.

Can anybody help?

[Jeet_singh]

@Utpal71,

Welcome to the HP Forums 🙂

I see from your post that you are having issues related to printing from your HP LaserJet printer. Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes before the issue started?

Have you tried to run the HP Print and Scan Doctor?

Have you tried to update the printer firmware?

Are you able to make a copy from the printer?

In the meantime, let's try these steps here: 

I would suggest here is to do a hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.

2. Run HPPSdr.exe from the download location on your computer.

3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer in not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

4. If a screen prompts you to turn on printer updates, click Yes.

5. If a screen prompts you to make your printer the default printer, click Yes.

6. Try to print. If the printer remains offline, continue to the next step.

If the issue persists, I would suggest here is to update the printer firmware - If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update on your printer from our HP support website. Alternatively you can also try to update the printer firmware directly from the printer control panel.

For more details on how to update, please use this link: HP Printers - Updating or Upgrading Printer Firmware.

Once done, restart the printer.

If the light is steady blue, then the printer is connected to the network. If the light is flashing, then the printer is not connected to the network. Go to Setup - Network - Wireless setup wizard to connect the printer to the network.

Once the printer is connected to the network, then assign a static IP to the printer:

• Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to get the IP address.
• Type the IP address on your web browser to obtain the printer EWS page on your computer.
• Go to "Network" tab - General - Select "Network protocols" - Select "Enable IPv4 only" (or similar) - Apply the settings.
• Go to the “Network” tab – Click on “Wireless (802.11) – Then click on “Network address (IPv4)
• Click on the radio button which says “Manual IP” and then click “Suggest a manual IP address” to give a manual IP address to your printer.
• Click on radio button which says “Manual DNS Server” and under manual preferred type 8.8.8.8 and under manual alternate type 8.8.4.4 (This is Google DNS server address)

Create TCP/IP Port: 

1. Search Windows for devices, and then select "Devices and Printers" In the list of results.

2. Right-Click the name of your printer, and then select Printer Properties.

3. Click the Ports tab, click on "Add port" select "Standard TCP/IP Port" and click "New Port"

4. Click next on the Add Standard TCP/IP printer port wizard, enter the printer IP address and click next and then click on "OK".

5. Now under the "Ports" tab you will find the newport with the printer IP address, click "Apply" and "OK".

6. Restart the computer.

For more details, please follow the steps suggested in the support document for - HP Printers - Printer is Offline (Windows)

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.