• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
HP Recommended
Color Laser Jet Pro M452nw
Microsoft Windows 10 (64-bit)

Working fine until a week or so ago.  Now when I print a multipage Word document, the printer prints two pages, pauses for a few seconds, prints two more pages, etc etc.  UNtil lasr week, it printed one page after the other with no hesiation.

 

1 REPLY 1
HP Recommended

Hi @Bernie45,

 

Thank you for posting on HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. I came across your post and wanted to assist you. I see from the post that you are having issues printing multiple pages on your HP LaserJet Printer. Don't worry as I have a few steps to help you get through this concern,

 

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

 

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

 

If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to check for the latest firmware update if available for your printer, http://ftp.hp.com/pub/softlib/software13/COL64037/ly-162067-1/M452_dn_nw_FW_Update-20150916.dmg 

 

I hope this helps. Let me know how it goes for further assistance. I'll be more than happy to help.

 

Keep me posted,

If the information I've provided was helpful,

give us some reinforcement by clicking the solution and kudos buttons,

that'll help us and others see that we've got the answers!

Good Luck.

Jeet_Singh
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.