Printer is stuck on initializing

Daicobulbs · ‎10-31-2017

the printer is stuck on initializing and will not respond to anything. Unplugged it nothing helping. Very disappointed in this printer

Copier-Pro · ‎11-19-2017

Lets try a reset.

Perform an NVRAM initialization
1. Turn the product off.
2. Simultaneously press the Right arrow button and the Cancel button. Keep these buttons
depressed as you turn the product on.
3. When Permanent storage init. appears on the display, release both buttons.
4. When the product has finished the NVRAM initialization, it returns to the Ready state.
ENWW

Hope this will help.

I am A certified Copier Technician.
It is so nice to give some help where possible and the forum is a great idea Thank You.Sometimes a picture speaks louder than words to find a solution.Should you find my help use full just give some credit for my effort please.
.Thank You.Copier-Pro
If you found this post helpful, you can let others know and also show your appreciation by clicking the “Accept as Solution”button, “Thumbs up" button!

#################################################################
I'M NOT AN HP EMPLOYEE AND DO ANSWER THESE QUESTION ON MY OWN BEHALF.
#################################################################

SGSKYNOOR · ‎11-19-2017

I am still not able to resolve this problem,

There is no display seen. Only triangular error display.

no communication with the printer.

Create an account on the HP Community to personalize your profile and ask a question