cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Note for common printer problems
Customers receiving the"will damage your computer" message along with others like "unable to access cups/tmp" or "'@%' cannot be opened" need to update their version of the macOS. Please check this article for more information: HP Printers - A [software component] will damage your computer message displays when printing or while installing (macOS) .
Highlighted
New member
1 0 0 0
Message 1 of 2
204
Flag Post

Solved!

Printer not duplexing when change fuser settings

HP Recommended
HP P3015
Microsoft Windows 10 (64-bit)

This is related to troubleshooting and even a discussion with an HP rep concerning a printer that wouldn't duplex.  The story goes as follows:

 

Did a windows 10 update, a firmware update and a driver update to a new computer and related (older) HP P3015DN printer.  I changed quite a few settings to secure the printer from potential network intruder.  This includes changing the admin password (which I still have yet to get to work as it locks me out even though I'm sure to enter the correct password... so not sure the parameters the password requires).  In changing many of the settings, the duplex stopped working.  I checked and tried other drivers and all the other things routine in many other posts in this community.  After talking with a rep we decided to just do a factory reset and I would change the settings one by one to figure out what broke it.

 

It turns out changing the fuser settings to low on the light paper I was using (to reduce curling) broke the duplexing of the machine.  This was after half a day of working through what the possible setting that messed it up could be.  It still does duplex properly with normal or low1 (which I assumed low1 was the lowest and low and normal was above that).  

 

Does anyone know where to obtain more helpful information concerning these fuser settings and why it would cause such an issue?  I assume it has something to do with how much the paper curls or the setting of the ink, but it seems rather strange to me that this setting would break duplexing.

 

I appreciate the help.

1 REPLY 1
Highlighted
Level 12
Level 12
6,302 6,248 671 1,626
Message 2 of 2
Flag Post
HP Recommended

Probably the designers felt that there would not be enough retained heat at that fuser temperature to provide reliable bonding. Disabling duplex would prevent toner contamination. 

 

In terms of password, a common thing we run into is accidently having caps lock on when setting password effectively making all upper case letters lower case and vice versa. 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation