cancel
Showing results for 
Search instead for 
Did you mean: 
Harv24
Level 1
3 2 1 1
Message 1 of 9
46,156
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

laserjet 1320
Microsoft Windows 10 (32-bit)

Printer will not print multiple copies with windows 10.

Works great with previous OS.

8 REPLIES 8
Harv24
Level 1
3 2 1 1
Message 2 of 9
46,144
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

Others have reported same but no answer from HP or Microsoft.

Somebody please HELP!

0 Kudos
Level 9
3,562 3,538 281 571
Message 3 of 9
46,114
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

I suspect that the following is the case:

 

  • Your document is a multiple page document (i.e. not just a single page).
  • You are selecting that copies be printed 'collated' (i.e. pages 1,2,3,..,1,2,3,...,1,2,3,...) rather than 'uncollated' (i.e. pages 1,1,1,...,2,2,2,...,3,3,3,...).
  • The driver assumes that the printer can produce the multiple copies from a single copy source - this is known as MOPYing (I think that it stands for  'multiple original copying').
  • But the printer does not have MOPY capability - this is usually only available if the printer has a hard disk and/or a large RAM disk - I don't think that the LJ1320 supports either of these.

You can confirm that the above is occurring by:

  • 'Capturing' a sample print job to a file (using the 'print to file' option in  the Word and/or driver Print dialogue
  • Then examing the beginning of the resultant .prn file (you should be able to open it in NotePad).
  • Most of the file may be unintelligible, but the beginning will look something like:

Capture.PNG

 

 

If the SET QTY command is there, this confirms that the driver thinks that the printer will perform the copies.

 

If so, check the Device Settings for the printer:

 

Capture2.PNG

 

to check whether or not the system thinks that a hard disk is installed on the printer, and whether or not Mopier mode is enabled.

 

If the Printer Hard disk is set to Installed, change it to Not installed.

If the Mopier Mode is set to Enabled, change it to Disabled.

 

Then repeat the tests to see whether or not that makes any difference.

 

It should do, although the print jobs sent to the printer will be larger (they will contain multiple copies).

Harv24
Level 1
3 2 1 1
Message 4 of 9
46,103
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

VOILA!

 

Thank you profusely to 'Distinguished Professor' dansdaduk.  I hope this reaches you.  YOU SOLVED THE PROBLEM!

 

Been to Geek Squad, HP, Microsoft, various gurus, to no avail.  You solved it with simple change of 'Printer hard disk' to

'Not installed' and 'Mopier mode' to 'Disabled'.

 

BLESS YOU!  Can't thank you enough.

Harv

Bill_Williamson
Level 1
10 8 0 1
Message 5 of 9
45,999
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

That finally solved my problem, HARD Disk Not Installed, MOPIER Mode ENABLED.  Much thanks for that one.

mgjd771
New member
2 2 0 2
Message 6 of 9
45,764
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

I was having difficulty printing multiple copies with my HP LAserJet 1320 using a windows 10 - 64 bit operation system.  Your solution worked perfectly.  Thank you. 

Highlighted
mgjd771
New member
2 2 0 2
Message 7 of 9
42,536
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

Thank you for your advice.  I used your solution on two different occasions.  Once with original windows 1o was installed and again when I re-installed windows 10.  Both times my HP 1320 would not print multiple copies.  Your solution worked and saved me a major headache.  Thanks Again.

Mike DeLo

JeffFinnan
Level 2
18 12 1 1
Message 8 of 9
40,004
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

This disabling worked for me. Thanks much.

andrew1724
New member
1 1 0 0
Message 9 of 9
18,286
Flag Post
HP Recommended

Solved!

Printer will not print multiple copies with windows 10

Brilliant- thank you!

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation