The printer does not connect or print(LaserJet P1006)

[mw1234]

The laserjet printer is not connected and does not print, and the help articles do not help(laserjet p1006)

[Riddle_Decipher]

@mw1234

Welcome to HP Forums, 

This is a great place to get support, find answers and tips, 

Thank you for posting your query, I'll be more than glad to help you out 🙂 

As I understand the printer doesn't connector or print,

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details: 

• Did you perform a hard reset on the printer?
• Have you printed a test page using the diagnostics?

While you respond to that, here's what you need to do:

(Resetting the printer can resolve some types of slow printing issues)

1. Turn the printer on, if it is not already on.

2. Wait until the printer is idle and silent before you continue.

3. With the printer turned on, disconnect the power cord from the rear of the printer.

4. Unplug the power cord from the wall outlet.

5. Wait at least 60 seconds.

6. Plug the power cord back into the wall outlet.

      NOTE:

   HP recommends connecting the printer power cord directly to the wall outlet.

7. Reconnect the power cord to the rear of the printer.

8. Turn on the printer, if it does not automatically turn on.

9. Wait until the printer is idle and silent before you proceed.

Try to print. If the issue persists, continue to the next step.

I recommend you delete the driver at the root level and retry, follow the steps below: 

1.) In Windows, search for and open Programs and features 

2.) Select your HP Printer 

3.) Select Uninstall 

4.) In Windows, search for and open Devices and printers 

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device' 

6.) Open up the run command with the "Windows key + R" key combo. 

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s") 

8.) Click on the "Drivers" tab 

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10.) Select Ok 

11.) Select Apply and Ok on the Print Server Properties windows 

12.) Close Devices and Printers 

Then, Click here to access the HP website, find the drivers compatible with your windows and install it.

If the issue persists, please go ahead and install the windows built-in drivers: 

If a full feature driver from HP is not available for your printer, you must install the built-in print driver. A full feature driver for one or more Windows versions is not available for your printer, either from the CD that shipped with your printer or from the HP website.

   NOTE:

Where is the download button? The HP print driver is built into the Windows operating system or is installed through the Windows Update feature on your computer. You do not need to download anything from a website in order to print, scan, or fax.

See the Frequently asked questions in this document for additional information, including how to scan using this driver.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: Click here

(By the end of this article all the issues should be resolved)

Keep me posted,

For I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, 

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.