What is considered a High print/permission count?

KyleWatters · ‎12-05-2019

Hi, I am new to Laser print. I wanted to save money and I'm planning on getting a used one. The print count is 7,900. My question is is that a lot? If not what is the normal? Or high?

Thanks

Macmac55 · ‎12-05-2019

No that is not a high amount of prints. The machine should work fine might just need a cleaning if one has not already been done. Some printers can last to a million prints with the proper upkeep I have seen some pass the million mark

KyleWatters · ‎12-05-2019

Thank you for the knowledge

Macmac55 · ‎12-05-2019

your welcome, If you want to be extra safe it would not hurt to spend the extra money on a protection plan from HP if you run into issue they can cover you.

If your happy with this info please leave me a Kudos

Repairatrooper · ‎12-05-2019

Most carepacks are only available equipment that is still covered under standard warranty. A low cost product like this is not likely worth putting under a maintenance plan. At this page count at most you might have to clean the pickup roller. Check the inside of the printer carefully to make sure they have not used a cheap reman cartridge and had a toner dump inside. If it feeds and prints ok it is probably fine.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Create an account on the HP Community to personalize your profile and ask a question