Wireless setup

[FacetsT]

When I go into the wireless menu, there is no wizard to be able to enter my SSID.  Frustrating!

[TEJ1602]

@FacetsT, Welcome to HP Support Community!

Use this link to understand the control panel features of your printer.

Now try connecting the printer to the wireless network with WiFi Protected Setup-

1. Make sure your router has a WPS button or a button with the WPS icon

   • If the router has a WPS button, do not press the button yet. Continue to the next step.

2. Place the printer within range of the Wi-Fi router signal.

3. Put the printer in WPS connection mode.

   • Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select the Wi-Fi Protected Setup, select Push Button, and then select Start.

   • Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds until the wireless light flashes. For Tango printers, press and hold the Wireless button and the Power button on the rear of the printer for five seconds until the blue bar flashes.

4. Within two minutes, press and hold the WPS button on the router for three to five seconds, or until the connection process begins.

5. Return to the printer and check the status of the wireless light or bar.

   • If the light or blue bar stops flashing, the printer successfully connected to the network.

6. Make sure your computer or mobile device is on the same local wireless network you connected the printer to.

Once the connection is successful, you can try connecting it to your Computer or Moblie device and try printing.

Let me know if you need any further assistance.

What is the Operating System installed on your Computer?

Keep me posted.

Cheers 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!