drivers to install a HP LaserJet MFP M130fw on Windows Serv... - HP Support Community

Rgdemott · ‎03-25-2020

ShlomiL · ‎03-25-2020

Hi,

Download and use below drivers:

https://ftp.hp.com/pub/softlib/software13/printers/COL71135/LJM129-M134_UWWL_4-1_UWWL_4_1_Basicx64_4...

To install the printer on a Server OS, use the command line to install the driver and not the standard installation wizard.

The same steps below apply for your printer software too, be sure to add an ENTERPRISE=Yes argument as described within the Customize the installation section:

https://support.hp.com/gb-en/document/c03351547

Regards,

Shlomi

Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

Fuliabe · ‎03-29-2020

Hello, I got the same problem: I can't print on a M130fw from a Win Server 2012R2 on the lan. I followed all the procedure without luck. I updated firmware too. I can ping the printer, I can access its web admin page, but I can't print to it.

I tried both drivers (PCLmS and PCLm-S), no luck.

I tried to use Print and Scan doctor, no results.

I can regularly send prints from a Win10pro.

Any tips?

ShlomiL · ‎03-30-2020

What happens when you try to print? Any specific error message or behavior occurs?

Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂

Fuliabe · ‎03-30-2020

No error displayed: print work correctly appears on work list window and then disappears from it, like it has been sent to the printer, but none comes out.
I am using a TCP-IP port with fixed IP, Raw, port 9100, SNMP disabled

Rgdemott · ‎03-30-2020

I gave up on the M1 30 and have ordered an M1 48 which according to HP’s technical people will actually allow you to install it on Windows server 2012 2016 and 2019. The price was about the same as what I paid for the 130 so why not.

Rgdemott · ‎03-30-2020

I got the printer to function on server 2012 however the scanner capability was not available. I have given up on the M130fw and are in the process of replacing it with an M148fsn which according to HPs technical support people will actually install on windows server 2012 2016 and 2019. Thank you for your assistance.

Repairatrooper · ‎03-30-2020

Many of the very low end printers have no PCL interpreter built in and rely on the driver. These devices were never designed to be operated in a server environment and will cause headaches and heartaches. In my experience the minimum printer series that you should even consider in an enterprise environment is the 400 series.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Fuliabe · ‎03-31-2020

I'm sorry but I can't accept the easy way of buying another MFP: drivers for the M130fw are available for Win2012 too so why I can't print? I print a sheet/day, the printer is like new (mounted the first spare toner few months ago) and now I have to change it? No. I can't accept it. I need to find a solution. It's not for the money, but it is the principle that is wrong

drivers to install a HP LaserJet MFP M130fw on Windows Server 2012R2

Create an account on the HP Community to personalize your profile and ask a question