01-20-2020 03:42 AM
I need the factory reset procedure for the laser color 150nw.
printer admin page wont let me login after changing default login details from U: admin P: <empty>
Solved! Go to Solution.
01-22-2020 03:55 PM
Welcome to the HP Support Community!
I reviewed your post and I understand that you want to reset the printer to factory settings.
Don’t worry, I assure you I will try my best to get this sorted.
I recommend you follow the below steps to reset the network settings and this should reset the password.
Here is how it is done.
Press and hold the (Wireless) button on the control panel for about 20 seconds. When the (Attention) LED and the (Power) LED start blinking together, release the (Wireless) button.
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
I am an HP Employee
01-23-2020 04:13 PM
I have sent you a private message with the Steps to perform a Reset
Please check your private message icon on the upper right corner of your HP Forums profile.
Next to your profile Name, you should see a little blue envelope
I Am An HP Employee
02-04-2020 03:30 PM
This model doesn't have option for Semi Full Reset. You can perform a cold Reset
Press and hold the GO & JOB CANCEL button while powering on printer. After all the LEDs are blinking, release buttons.