10-22-2017 07:44 AM
printer is starting to 79 service errors and does a reset
doing a power reset on printers cleares up issue for 12-24 hours but it starts re occoring.
is the a board failure or can a sotware update correct the issue.
Solved! Go to Solution.
10-23-2017 12:03 PM
Hello, @sbdaddy – Hope you are well 🙂
Thank you for becoming an HP Forum member. It is a fantastic location to get help from the community, get suggestions and find what has worked for others!
I understand that you are getting error 79 with the LaserJet printer. Did you try to update the printer firmware?
If not, go to http://hp.care/2psbT2D to download and update the printer firmware. Restart the printer once done.
If the issue persists, then I’d request you perform a complete reset on the printer. I am sending you a private message with the steps. Please check the mailbox icon at the top right corner of your screen to access your inbox.
Let me know if that helps!
Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!
I am not an HP Employee
10-18-2019 06:37 AM
I am having the same problems as the post above. My HP 277 flashes Service Error 79 while printing first couple of pages of a 10 page job and then shuts off with paper still in the paper path.
I tried updating the firmware to the latest version, but that has not solved the problem. You mention doing a full reset in the accepted solution -- how would i do that?
10-21-2019 04:14 AM
Welcome to the HP Support Community!
I reviewed your post and I understand that you want to know how to perform a reset on the printer.
Don’t worry, I assure you I will try my best to get this sorted.
As the steps to perform a reset are confidential and specific to your printer. I will be sending you a private message please watch your inbox for more information.
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
I am an HP Employee
10-21-2019 07:19 AM - edited 10-21-2019 08:30 AM
Hello The_Fossette , I have found these amounts on Google, I have exactly the same problem with my HP MFP 277 DW. Can you also send me a message how to reset the printer? Best regards, Thomas Müller (Germany) Translated with Google