printing and copying

[JED13]

My HP psc 2100 all in one printer copy pages are blank and printing from computer produces lighter copies than normal and does not print capital i's and l's.

[Barachiel]

@JED13

Good Day. A warm welcome to the HP community. 🙂

follow these steps to reset the printer.

Turn the printer on, if it is not already on.

Wait until the printer is idle and silent before you continue.

With the printer turned on, disconnect the power cord from the rear of the printer.

Unplug the power cord from the wall outlet.

Wait at least 60 seconds.

Plug the power cord back into the wall outlet.

   NOTE:

HP recommends connecting the printer power cord directly to the wall outlet.

Reconnect the power cord to the rear of the printer.

Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

If this doesn't fix, I'm sending out a Private message with the required information's,

Keep me posted,

Good Luck. 🙂