• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We are proud to announce new Poly Studio Series video bars and remote room control with Poly Connect. Read more about the solutions!
HP Recommended

I have a HDX 7000 HD System. Default password and any passwords that it may have been would not let me into system. Factory reset the system, which downgraded to firmware 2.6, I was able to upgrade to newest system software 3.1.14. Upon factory resetting the system the camera image is green, I thought upgrading to current firmware would fix the issue, the system is able to identify the camera as eagleeye III, but the image of the camera is still green. The color is correct on menus, etc... 

Have tried rebooting multiple times, reseating connections, re-identifying camera. factory reset and push fresh firmware.

current setup is. 

Eagleeye III

system software - 3.1.14-56008

Any help would be greatly appreciated!!

1 REPLY 1
HP Recommended

Hi there,

I am thinking that it may be a bad pin or a short on the camera cable. If you've re-seated the cable already and no change, that would be my next best guess...

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.