• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We are proud to announce new Poly Studio Series video bars and remote room control with Poly Connect. Read more about the solutions!
Locked

‎10-30-2023 02:02 AM

HP Recommended

Hi, Hoping for some help. We have a few Poly Studio X52's which are a significant upgrade on our other X50's. We have 1 main problem with the X52's. They dont work seamlessly with our displays. (Samsung QB series). We have loads of error messages displayed (on the Samsung) from "no power detected" to "HDMI not connected". We have tried multiple different settings on the screens with no firm resolution. Sometimes they work and sometimes they dont. Our X50's and X70's work fine with no issues. We have also connected other vendor devices to the screens and have no problems with them. We have tried different cables, upgrading screens and all the settings available on the X52 and screen with no luck. Any help would be appreciated.

 

Thanks Will

2 REPLIES 2

‎10-30-2023 02:06 AM - edited ‎10-30-2023 02:08 AM

HP Recommended

Hello @WillS66 ,

 

Welcome to the HP community.

 

Unfortunately, your post does not contain the currently used Software version for the HP Poly product, the HP Poly Software, or the Partner application and the software version of this you are using.

 

This is important especially in the future when someone finds this post in days, months, or years to come.

 

Please do not simply edit the original post but reply with the versions.

 

I suggest you raise a ticket and state 5113464218 / PECS-248019 and provide details of the software version of the display. Please work with our support organization in your region. Details on how to contact us are in my signature

 

EDIT: A 1080 EDID adapter for example from EVanlak works for now for one of my customers.

 

Best regards

 

Steffen Baier

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Was this reply helpful? Yes No

‎12-11-2023 05:09 PM

HP Recommended

Hi Will, I just started a post with the same issue and didn't see yours.  Have you had any success?  I have factory reset our screens and they seem to operate a bit better now, but I now need to reintroduce the Crestron control selects the various inputs and I will see how that goes.

Was this reply helpful? Yes No
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.