Create an account on the HP Community to personalize your profile and ask a question
06-13-2022 12:00 PM
Is anyone else having ZDM fail to update their Studio X devices and Zoom's only answer is a hard reset and start all over?
I'm on my third X50 (3.11.0-364021) that will not update via ZDM (10.4 or 10.6) and the only solution seems to be a hard reset. Which wouldn't be a big deal if these affected systems were not in remote offices that do not have IT staff, so now you have to have to talk an admin person through shoving a paper clip into it and hope that does the trick.
06-13-2022 10:59 PM
Welcome back to the Poly community!
It looks If Zoom support asked to factory reset then device need to factory reset. This is controlled by partner (zoom).
if partner do no provide us the updates or the updates do not given before or after the launch of Poly firmware update it wont be inserted to Poly firmware.
Suggest you to take up this with Zoom.
06-13-2022 11:47 PM
Welcome back to the Poly community.
In addition to what my colleague @Poly_Rahul said, The 3.11 release incorporates Zoom VendorOS API v1.7 and ZDM 2.0 on G7500 and Studio X systems and Poly TC8.
Updating the device to 3.11 should automatically update the partner app ( Zoom room in this case )
If any app update has been released by the provider (E.g Zoom, Microsoft), it is usually incorporated in the next OS release.
Please confirm if you are specifically looking to update only Zoom room app or Poly VideoOS 3.11.0 software?
06-14-2022 06:28 AM
All of my devices are running VideoOS 3.11, ZDM has updated some of them to 3.10.6 and others it doesn't it just hangs at "Updating...". I've been dealing with this for weeks, I enabled automatic updating via ZDM, some of them updated and others went offline w/a "cannot verify connection" error, the only solution was a hard reset and start from scratch which is not really a solution, it's a last resort. Zoom's first suggestion is always to check firewall settings even though these devices were previously working fine and others on the same subnet updated w/o an issue.
Thanks for the response.