cancel
Showing results for 
Search instead for 
Did you mean: 
acatalano
New member
1 0 0 0
Message 1 of 2
149
Flag Post

Printer will not connect to computer

HP Recommended
HPENVY 7640
macOS 10.12 Sierra

My computer is connected to the wifi and my printer is connected to the wifi, however, when I go to connect to my printer it will not connect.  What do I need to do?  Please help!!

1 REPLY 1
Kumar0307
HP Support Agent
HP Support Agent
18,814 18,813 1,337 1,550
Message 2 of 2
Flag Post
HP Recommended

Hi @acatalano

Welcome to the HP Support Community. I understand you are trying to connect the printer and the MAC wirelessly. I'd be happy to assist you.

 

Let's try the below steps to see if that helps - 

  

1.) Remove All Barriers: Certain building materials can get in the way of weaker signals like Bluetooth. Metal, bulletproof glass, concrete, and plaster are particularly bad, and marble, plaster and brick aren’t great easy. So if you’re really struggling with interference, your first step should be to move your Bluetooth devices away from these materials. That means no brick walls between you and your devices, and definitely no metal desks! 

  

2.) Change Router Channel: If you have an Apple router and you’re constantly getting interference with your WiFi, try rebooting it. Upon restart, the station will search for a new channel. Specifically, a different channel than the one your Bluetooth devices are using to communicate. If you don’t have an Apple router, you may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best. 

  

3.) Move Closer to Your Router: If you often find that you’re getting interference when talking on a wireless headset while on a WiFi call (you’ll know because you’ll hear static), try moving closer to your router. This will give you a more robust WiFi connection, so the Bluetooth frequency can’t overpower it. 

  

4.) Get Away From Microwaves and Fluorescent Lighting: Both emit frequencies of 2.4GHz, and moving away from them will distance you from the source. 

  

I'd like to know the following to isolate the issue further- 

  • Make sure the printer and the MAC are connected to the same wireless network.
  • This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
  • If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
  • Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.

Perform a PING test to check the connectivity

  1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
  2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
  3. Check the second box that says Send only > 10 pings
  4. Click on ping > Check the results at the end if any packets are lost
  5. Note: There should be 0% packet loss, share the results in your next post.

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation