SSID Found FAIL

[Mal61]

Hi,

I'm trying to set up wireless printing but 'Network Name (SSID) Found FAIL keeps coming up. The configuration Summary shows the correct SSID.(Blacked Out)

I've seen a previous post where the problem was solved by changing the SSID Network Name. Can this be solved without changing the SSID Name?

[The_Fossette · Accepted solution]

@Mal61,

Welcome to the HP Support Community!

Wireless light on the printer is steady or blinking?

Meanwhile, I recommend you follow the below steps and check if it helps.

The HP Print And Scan Doctor might get this sorted out

Please download and run the HP Print And Scan Doctor from this Link: https://ftp.hp.com/pub/printers/hppsdr/HPPSdr.exe

Run PSDR v5.0.2 

Once the PSDR detects the Printer, it will show up the IP address and Software Status. 

Select the correct Printer and click on Next. 

PSDR will check if the Printer is on the Network and communication between the PC and the Printer. Once the connection check is done, click on Fix Printing 

Once PSDR goes through all checks and automatic fixes, click on Print a test page. 

Regardless if PSDR printed the test page or not, click on “NO PRINT” 

PSDR will then notify you that there is an update available, click on continue, and PSDR will apply the patch and ask for a reboot. 

Post restart the PSDR will run automatically to check for more issue.  If no issue found close PSDR. 

Also, try using the HP Smart App and let me know if that helps. Link: https://www.microsoft.com/en-us/p/hp-smart/9wzdncrfhwlh

You can refer to this link: https://support.hp.com/in-en/document/c03561640 for more information on HP Smart App

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!