-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
HP Recommended
Hi @Larry424
Welcome to the HP Support Community. I'd be happy to assist you with the "cannot connect to wifi" issue.
To better assist you -
What is the status of the wireless light on the printer, steady or blinking?
Is your printer connected to a home network or public network?
Meanwhile, follow the below steps-
If you changed Internet Service Providers (ISP) or replaced your router, reset the wireless settings on the printer, and then connect the printer to your wireless network.
Step 1: Restore factory wireless settings
On the back of the printer, press and hold the Wireless button 
for 5 seconds. The Edge lighting flashes blue.
Step 2: Connect the printer to your wireless network
If your router supports WPS, use these steps to connect your printer to your wireless network with the WPS button on the router.
-
Turn on the printer.
-
Locate the WPS button on your router, but do not press it yet.
If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.
-
On the back of the printer, press and hold the Wireless button
and Power button 
at the same time for 5 seconds. -
On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.
NOTE:
The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.
Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.
You may also refer to - Install and Use the HP Smart App (Mac)
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community