cancel
Showing results for 
Search instead for 
Did you mean: 
cheeto81
New member
1 0 0 0
Message 1 of 2
220
Flag Post

when try to enable web services for eprint, get Connection error. Check Internet connection.

HP Recommended
laserjet m1212nf
Microsoft Windows 10 (64-bit)

when i login to the printer via ip, and go to HP web services and click "enable" for eprint, i get the error "Connection error. Check Internet connection."

 

other question said updating the firmware fixed it but that hasn't worked for me

the pathetic warranty expired after 1 year purchase in 2013, so Hp won't let me contact them

 

any other ideas to enable eprint to get the email address to print to?

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,554
Message 2 of 2
Flag Post
HP Recommended

@cheeto81, Welcome to HP Support Community!

 

Follow the steps below-

 

Restart the computer, printer, and router

To resolve any connectivity issues, restart the computer, printer, and router.

NOTE: 

The following steps temporarily disconnect network and Internet connections, and require restarting your computer. Complete any tasks or downloads in progress before you continue.

  1. Turn off the router by pressing the power button or disconnecting the power cord.

  2. Turn off the printer.

  3. Close all running programs on your computer, and then shut down the computer.

  4. Press the power button or reconnect the power cord to the router, and then wait for the Internet activity light to display a normal connected status.

  5. Turn on the printer.

  6. Turn on the computer.

  7. Try to turn on Web Services.

If the issue persists, continue to the next step.

 

Turn on Web Services from the Embedded Web Server (EWS)

Using the printer EWS to turn on Web Service might resolve any communication issues with the printer control panel.

  1. Print a Network Configuration Page.

    • Printers with LCD and text-based control panels: Print the page from the Wireless, Network Settings or Setup menu.

    • Printers with basic control panels (buttons only): Print the page using the button combinations on the printer control panel. For some printers, press the Wireless  and Information  buttons simultaneously, or press the Wireless and Start Copy Black  buttons at the same time.

    For detailed instructions to print a Network Configuration Page, go to HP Customer Support, type your printer model, and then search for the document to 'print a self-test page.'

  2. On the Network Configuration Page, locate the URL(s) for Embedded Web Server address.

    NOTE: 

    If the URL for the EWS is http://0.0.0.0, the printer is not connected to a network. Reconnect your printer to the network, and then continue troubleshooting.

    Figure : Locating the URL(s) for Embedded Web Server address

    Locating the URL(s) for Embedded Web Server address
  3. On your computer, open an Internet browser.

  4. Type the URL address for the EWS in the browser address bar, and then press Enter.

    NOTE: 

    Make sure to type the IP address into the Internet browser's address box. If typed into a toolbar search box or search engine, the EWS does not open.

  5. If a website security certificate displays in the Internet browser, click Continue.

    The EWS webpage for the printer opens, which confirms that the printer is on the same network as the computer.

  6. On the EWS webpage, click the Web Services tab.

  7. On the Web Services Setup page, click Continue, Turn On, or Enable, and then follow the on-screen instructions

    Figure : Example of clicking Continue

    Example of clicking Continue.

If the issue persists, continue to the next step.

 

Check the Internet proxy server settings

For networks that use proxy servers, update the Web Services settings in the printer EWS with the proxy information.

  1. Locate the Internet proxy settings.

    • Windows: Search Windows for Internet, and then click Internet Options in the list of results. On the Internet Properties window, click the Connections tab, select your network, if necessary, and then click Settings.

      The network settings menu displays with the proxy settings.

      Figure : Example of proxy settings in Windows

      Example of proxy settings in Windows
    • Mac: Open System Preferences, and then click Network. On the Network window, click Advanced, click the Proxies tab, and then select your proxy, if necessary.

      Figure : Example of proxy settings in Mac

      Example of proxy settings in Mac
  2. Write down the Address and Port values for your proxy server connection.

  3. From the EWS, click the Web Services tab, and then click Proxy Settings.

    Figure : Clicking Proxy Settings

    Clicking Proxy Settings
  4. Type the Address and Port values for your proxy server connection, and then click Apply.

  5. Try to turn on Web Services.

Refer to the document HP Printers - Cannot Connect to Web Services for additional troubleshooting steps.

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation