b&o equaliser not working

[venkat12345]

the b&o graphic equaliser is not working. when i switched the equaliser from bass to treble mode, there is no change in the audio

. unfortunately i removed registry backups.will it effect the equaliser

[DavidPK]

Hi,

What version of Windows are you using?

Regards,

DP-K

[venkat12345]

Windows 10

[venkat12345]

windows 10

[DavidPK · Accepted solution]

Hi,

Try the following.

Download the Realtek HD Audio installer on the link below and save it to your Downloads folder.

http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72117.exe

When done, hold down the Windows key and press R

Into the Run window, type devmgmt.msc and hit enter.

In Device Manager, expand Sound, Video and Game Controllers.  Right click the Realtek device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.

When complete, download and reinstall the Chipset driver on the following link.

http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72105.exe

When the Chipset reinstallation has completed, restart the notebook.

When windows has reloaded, open your Downloads folder, right click on the Realtek installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again and let windows fully load for a few minutes before checking.

Regards,

DP-K

[venkat12345]

Thank you so much!
It's working

[DavidPK]

Hi,

You're welcome and good to hear it's Ok

All the best,

DP-K