cancel
Showing results for 
Search instead for 
Did you mean: 
76Liberty
New member
1 0 0 0
Message 1 of 2
270
Flag Post

internal microphone not detected

HP Recommended
HP Envy x360
Microsoft Windows 10 (64-bit)

Serial [Personal Information Removed] Product 3F613UA#ABA

during webex meeting my microphone could not be detected. I could hear but no one could hear me. I see I have an issue with the Intel Smart Sound SST driver error code 10. I uninstalled and deleted then tried to reinstall but error code 10 came up. I'm not sure this is related to my microphone issue.

1 REPLY 1
The_Fossette
HP Support Agent
HP Support Agent
29,155 29,127 1,957 2,603
Message 2 of 2
Flag Post
HP Recommended

@76Liberty

 

I reviewed your post and I understand that the microphone is not working on your computer.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the below steps and check if it helps.

 

1. Run Audio Troubleshooter

  - Launch Troubleshooting by typing and clicking “Troubleshooting” in Windows search.

  - Click on "Playing Audio".

  - Follow the on-screen instructions.

2. Check if microphone isn't disabled.

  - Right click on the Volume Icon on the taskbar, select "Recording Devices".

  - Click on "Show disconnected devices", and "Show disabled devices".

  - Select on Microphone, click on "Properties". If it is disabled, enable it.

  - Once enabled, set Microphone as default audio input device.

3. Check if microphone isn't muted.

  - Right Click on the Volume icon on the taskbar, select "Volume Mixer".

  - On the Microphone slider, slide it up to 100%.

4. Boost sensitivity of Microphone

  - Right Click on the Volume icon on the taskbar, select "Recording".

  - Double click on Microphone.

  - Open the Levels Tab, move the Microphone boost slider up to check audio.

 

5. Disable enhancements

  - Right Click on the Volume icon on the taskbar, select "Recording“, Double

     click on Microphone.

  - Open the Enhancements / Effects Tab.

  - Check "Disable All Sound / System Effects“. Click Apply, OK, test the Microphone again.

6. Change format of the Microphone

  - Right click on the Volume Icon on the taskbar, select "Recording Devices".

  - Double click on Microphone.

  - Go to the Advanced Tab, choose any of the 16 bit options on the list.

 

Let me know how it goes and you have a great day!

 

P.S: Welcome to the HP Support Community 😊

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

Stay Home – Stay Safe

The_Fossette
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation