19b error

[prashanth22199]

19 b error 

[Jeet_singh]

@prashanth22199,

Thank you for posting your query on HP Community,

Did you try to update the bios and check again?

Does the computer randomly overheat, freeze or shut down?

Did this happen after a recent software or windows update?

This looks like a possible hardware failure, however, I would suggest you try these steps here before confirming this to be a hardware failure.

Let's start off by updating the Bios on your computer from our HP support website, using this link. Once done, restart the computer and check if it gets fixed.

If the issue persists, I would suggest here is to run an extensive system test from F2(Please capture the failure ID for further assistance).

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key.

3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

4. Click Extensive Test.

5. Click Run once, or Loop until error.

While the test is running, the time remaining and test result for each component are

shown on the screen.

6. If a component fails a test, write down the failure ID (24-digit code) so you have it

available when you contact HP Customer Support. The information is also available in

Test Logs on the main menu.

You may also go through this support document for - HP Notebook PCs - System Fan (90b, 90f) Error Message on Startup

Let me know how it goes for further assistance. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!