-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Re: Black screen and caps lock button blinking while powerin...

Create an account on the HP Community to personalize your profile and ask a question
11-21-2019 07:53 AM
While trying to turn on the laptop, after pushing the power button, the button itself lights up as normal but the screen does not turn on. At the same time capslock button flashes 5 times slowly followed by 3 times fast blinking and the process repeats itself. Eventually the laptop powers up (after 20 or so times trying) and works for a while but when i turn it off an try to turn it on the next day the problem occurs again. Suspecting the motherboard or something similar because the laptops motherboard died but was replaced under warranty. Still has about a year and a half of warranty.
Solved! Go to Solution.
Accepted Solutions
11-24-2019 04:22 AM
Welcome to the HP Support Community!
I reviewed your post and I understand that the computer is not booting to Windows and the caps lock key is blinking.
Don’t worry, I assure you I will try my best to get this sorted.
I recommend you follow the steps in the below article and check if it helps.
https://support.hp.com/us-en/document/c01732674
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
Cheers!
The_Fossette
I am an HP Employee
11-24-2019 04:22 AM
Welcome to the HP Support Community!
I reviewed your post and I understand that the computer is not booting to Windows and the caps lock key is blinking.
Don’t worry, I assure you I will try my best to get this sorted.
I recommend you follow the steps in the below article and check if it helps.
https://support.hp.com/us-en/document/c01732674
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
Cheers!
The_Fossette
I am an HP Employee
12-03-2019 11:30 AM
Seems to be a failed motherboard. (Second one in less then 6 months) Something is very wrong with omen laptops quality check. First two 15 inch models i ordered both had dead pixels (i7 7700 HQ & GTX 1060 models, 8GB RAM, 256GB m.2 NVME SSD), and the retailer offered to replace them with an upgraded model (17.3 inch i7 7700HQ & GTX1060 , 16GB RAM, 256GB m.2 NVME SSD, 1TB HDD) which had a bad screen bleed issue. Took it in for repairs, they supposedly changed the display but it still has a pretty bad screen bleed. My brother bought the newer model (the one in question, i7 8750 & GTX 1070) which burned two motherboards in around 6 months.
12-03-2019 02:04 PM
I recommend you contact support and they will assist you in this regard.
Here is how you can get in touch with support.
1)Click on this link – www.hp.com/contacthp/
2)Select the product type.
3)Enter the serial number of your device or select let HP detect your product option.
4)Select the country from the drop-down.
5)You should see the HP phone support number or Chat option listed.
Cheers!
The_Fossette
I am an HP Employee