Boot Device Not FOund

[bigdaddynyc2006]

I am receiving the "Boot Device not Found" error. I have gone through almost all the steps given but nothing has resolved it. The only step I cannot get to is the HP Recovery Manager step as the system won't send me to it. 

Please let me know if anyone has any advise on how to resolve

[WAWood]

@bigdaddynyc2006 

This issue is often due to a failing drive.

So, let's check that first, because if it is failing, it would need to be replaced and there is no point then in doing anything else until we confirm that.

If your PC is new enough to support UEFI, you can use these steps to test the HDD (Hard Disk Drive): http://support.hp.com/us-en/document/c00439024

If not, to check the HDD you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) Press the Function key for testing the hard drive (usually F2) and let it run.

If the drive checks out OK, then report that and I can provide you options for reinstalling Windows on your PC.

Please note that if your model has an SSD instead of an HDD, these diagnostics might not work properly.

[bigdaddynyc2006]

Hello,

I tested the drive and  both test came back ok. Please let me know what next steps to take 

[WAWood]

@bigdaddynyc2006 

Windows PCs use two different sets of files to get you to a working desktop.

In terms of the first, Windows boot files, you need to follow the instructions below to create boot media from Macrium Reflect (MR) that can be used to rewrite/repair the boot media on your PC:
1) Download and install Macrium Reflect (MR) from this link on a working PC: http://www.macrium.com/reflectfree.aspx
2) Use the option to create a boot USB stick or CD

That will create MR bootable media. Then, you can boot your PC into WinPE using that media.

Have patience, as that can take a while to start and bring up the screen.

Once the screen is there, select the option to Fix Windows boot problems. It will then search for the OSs installed and list them, Select the one you want to repair and click Next.

It will now do the repairs, listing the things it has done.

When finished, select the option to Restart the PC.

If this worked, the boot repair succeeded and you will have your PC back.

But if it did not, the Windows system files are most likely corrupted and you would have to reinstall Windows from scratch to fix that.