• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Seize the moment! nominate yourself or a tech enthusiast you admire & join the HP Community Experts!
HP Recommended
Zbook 15 G2
Microsoft Windows 10 (64-bit)

Hello there!

I have a boot problem.

First of all, I can only install OS with MBR partition mode (and not GPT) in my case by using a USB flash disk as the media to install OS.

But the main problem is after Installing the OS (I've tested windows 10 and linux ubuntu like thousands of times with different versions) the notebook is not able to load the OS, it sticks in hp logo screen and the hdd LED turns and remains on like it's being used.

I've checked hdd (Quick test) and it passed. Even tried windows 10 diagnosis in installation screen (startup repair) and it said "windows 10 couldn't repair the problem, a log has been saved in E:\windows\system32\..." (which I created just one partition but I suppose it called the drive E because a USB disk and DVD drive itsel may reserved C and D).

So what is the problem?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Thanks for the reply. The problem has been solved. 

I set the mode to RAID so it could boot from hdd. Though for installing an OS AHCI should be set unless it couldn’t install the OS in my case.

View solution in original post

6 REPLIES 6
HP Recommended

Hi

I don't know.

I would make a W10 install USB from here... Create Windows 10 installation media

To get started, you will first need to have a licence to install Windows 10. You can then download and run the media creation tool. For more information on how to use the tool, see the instructions below.

Onto an 8 GB USB stick, and install W10.  Preferably Secure/GPT partitioning.
 
Then when that is stable, install Ubuntu.
 
If in doubt please ask.
 
           
HP Recommended

Thanks I did. Same result 😞

As I said I can install windows successfully but it doesn’t boot. 

Such a strange problem I guess it’s a hardware problem.

HP Recommended

Hi

You have Windows installed?  ONLY Windows installed?

 

Then the next place to look / adjust is the boot manager sequence.

NOT THE BOOT ORDER.

F5/F6 may re-arrrange the sequence.

YOU CAN SEE I HAVE FIVE BOOT MANAGERS.

Microsoft Windows may be second on your list, Ubuntu being alphabetically earlier.

 

If in doubt please ask.

HP Recommended

Thanks for the reply. The problem has been solved. 

I set the mode to RAID so it could boot from hdd. Though for installing an OS AHCI should be set unless it couldn’t install the OS in my case.

HP Recommended

Prego.

Solved?

HP Recommended

Yep

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.