• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Seize the moment! nominate yourself or a tech enthusiast you admire & join the HP Community Experts!
Locked

‎10-14-2019 04:26 AM

HP Recommended
Product: 15-e073so
Operating System: Microsoft Windows 10 (32-bit)

Computer starts, screen shows HP logo, but will not boot Windows. After Advanced Test, failed DST-control of HardDisc. Failure-ID: UAGJTQ-6Q49QX-MFPWXG-6QR5Q3. What's wrong? 

1 ACCEPTED SOLUTION

Accepted Solutions

‎10-14-2019 07:09 AM

HP Recommended

Hi:

 

The error code translates to one word.  Failed.

 

99% of the time you get one of those codes you need to replace the hard drive and reinstall the operating system.

 

Below is the link to the service manual for your notebook, where you can find the hard drive removal and replacement procedure.

 

http://h10032.www1.hp.com/ctg/Manual/c03939658

 

You may want to consider purchasing a better performing, normally more reliable 2.5" solid state drive (SSD).

 

After you replace the hard drive, you can reinstall W10 as follows...

 

To reinstall W10, you can make your own 8 GB bootable USB W10 64 bit installation media using the media creation tool at the link below.

 

https://www.microsoft.com/en-us/software-download/windows10

After W10 has completed installing, you can install the drivers and available software from your notebook's support page.

 

https://support.hp.com/us-en/drivers/selfservice/hp-pavilion-15-e000-notebook-pc-series/5355006

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1

‎10-14-2019 07:09 AM

HP Recommended

Hi:

 

The error code translates to one word.  Failed.

 

99% of the time you get one of those codes you need to replace the hard drive and reinstall the operating system.

 

Below is the link to the service manual for your notebook, where you can find the hard drive removal and replacement procedure.

 

http://h10032.www1.hp.com/ctg/Manual/c03939658

 

You may want to consider purchasing a better performing, normally more reliable 2.5" solid state drive (SSD).

 

After you replace the hard drive, you can reinstall W10 as follows...

 

To reinstall W10, you can make your own 8 GB bootable USB W10 64 bit installation media using the media creation tool at the link below.

 

https://www.microsoft.com/en-us/software-download/windows10

After W10 has completed installing, you can install the drivers and available software from your notebook's support page.

 

https://support.hp.com/us-en/drivers/selfservice/hp-pavilion-15-e000-notebook-pc-series/5355006

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.