Forgot Bios Administrator Password Envy x360 m6 convertible

[MoreH]

Hi,

I forgot the administrator bios password.

System Disabled.  [i  84462912]

The code changed to [i  53582465] after I tried to reinstall the bios by pressing the windows and B button.

I already tried the passwords mentioned on the website bios-pw.org. None of them worked.

Any other ideas would be great!

Thank you in advance.

[DavidPK]

Hi,

Unfortunately the hashing routine for any codes that start with a 'i' have changed, so at the moment your options are down to Contacting HP support.

or

You can still remove a power on password by removing the rtc cell, then holding down the power button for 60 seconds before re-inserting the rtc - if you require a service guide for your machine, post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information.

Regards,

DP-K

[MoreH]

Hi David,

Thank you for your reply. However, it didn't work. Probably because the x360 series was changed and BIOS settings are apparently powered by the main battery, not a separate CMOS/RTC battery.

The code changed to [i  53582465] after I tried to reinstall the bios by pressing the windows and B button.

Is there another way to reset the password?

Best,

MoreH