-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- HP Pavilion dv6-1330sp Does not recognize SSD and updated Bi...

Create an account on the HP Community to personalize your profile and ask a question
08-16-2024 06:45 AM
I upgraded the ram memory to 8gb and cloned the hard drive to the ssd with WintoHDD After that, I tested the ssd on another notebook and all the data came up perfectly, including windows. But on the HP Pavilion dv6-1330sp it doesn't recognize the boot, in the Bios, so I updated it, to see if it enables the advanced settings
but to no avail, I tried using F10 then A, Fn and Tab but nothing, I'm drifting without knowing what to do.
Detail: the cloning was done from GPT to UEFI. I don't know if this has anything to do with the problem.
I also checked that the notebook has support! For SSD 2.5
Solved! Go to Solution.
Accepted Solutions
08-16-2024 09:33 AM
Hi @Wallhalas
You should not use GPT to UEFI, your BIOS does not support UEFI, you should use MBR partition.
- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.
08-16-2024 09:33 AM
Hi @Wallhalas
You should not use GPT to UEFI, your BIOS does not support UEFI, you should use MBR partition.
- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.