-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- HP Spectre 13 won’t boot or charge correctly

Create an account on the HP Community to personalize your profile and ask a question
10-15-2020 01:55 PM
Hi, I’ve had this HP Spectre x360 13 for over a year. As I try to turn on the laptop, it briefly turns on, but then suddenly shuts down before anything shows up on the screen. Also when trying to charge the laptop, it goes through very short cycles of charging, and not charging. I have tried resetting the laptop but it did not work, please could someone help me on this? Thanks
10-18-2020 12:17 PM
@AshikJ Welcome to HP Community!
I understand that the HP Spectre 13 won’t boot or charge correctly.
Please perform the below steps and check.
Hard Reset:
1) Shutdown the computer.
2) Unplug all the Adapter and peripherals connected.
3) Remove the Battery. ( not for Built-in Battery computer )
4) Press and hold down the power button for 15 to 20 seconds.
5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)
6) Try to turn on the computer and check, If the issue persists continue next step
Set BIOS default and restart:
- Restart your notebook.
- During startup, press F10 repeatedly until the BIOS menu is displayed.
- Once the BIOS menu is displayed, press F9 to restore factory defaults.
- Select Yes to confirm.
- Press F10 to save changes and exit.
- Select Yes to confirm.
- The computer restarts using the default settings.
Please perform the below steps on the computer to run a System Test
- Shut down/Turn off the computer
- Once the computer is completely Shut down/Turned off
- Now press the power button once to turn on the computer and immediately start pressing/tapping the F2 key on the keyboard
- This should open the UEFI Diagnostic screen on the computer
- Please select System Test and then select Extensive Test
Please let us know the result.
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!