HP x2 Detachable 10-p0xx refuses to boot up not plugged in

[The_Fletcher]

So last night I was using my laptop and I put it on charge but today it refused to boot up unpluged so I tried plugging it in and it worked

[WAWood]

@The_Fletcher 

You can check the battery to some extent using Powershell built into Windows 10, as follows:
1) Press Windows key + X
2) Click Powershell in the menu
3) Type powercfg /batteryreport

This will generate a report and if you scroll down, you will see Design Capacity and Full Charge Capacity ratings. If the Full Charge Capacity is less than 50% of the Design Capacity, it is faulty and needs to be replaced.

Also note the figure alongside the "Cycle Count". This tells how many times the battery has been fully recharged. A typical battery can handle around 500 charge cycles, but some will fail sooner than that.

[The_Fletcher]

This is what I got:

https://1drv.ms/u/s!ArMbejLC41O1wWbUf-TSTWz_hFxH?e=0g45Ge