Hard Drive Short DST Check: Failed , Failure ID: 0K581G-8Q7BK1-XD7URG-60VN03

[Kim1234567891]

My laptop all of a sudden went into a loop of automatic repair.  After figuring out how to run the system tests, it came back with "Hard Drive Short DST Check : Failed".  It did give a failure ID: 0K581G-8Q7BK1-XD7URG-60VN03.  Is there a way to get any of my files off from the computer or to repair it?  

[Paul_Tikkanen]

Hi:

You can repair the problem by replacing the hard drive and reinstalling the operating system.

Below is the link to the service manual, where you can find the hard drive removal and replacement procedure.

HP 15 Laptop PC (Intel)HP 15g Laptop PCHP 15q Laptop PC Maintenance and Service Guide

You may want to consider replacing the 2.5" mechanical hard drive with a better performing 2.5" solid state drive (SSD).

It is very unlikely that you will be able to recover any files, but you can try this...

Buy a SATA to USB cable.  Something like this...

BENFEI SATA to USB Cable, BENFEI USB 3.0 to SATA III Hard Driver Adapter Compatible for 2.5 inch HDD...

After you remove the drive, plug one end of the cable into the drive and the other end into a working PC's USB port and see if you can read/copy any files from the failed drive to the PC.

After you replace the drive, you can use the HP cloud recovery tool to create a bootable USB recovery drive that will reinstall W10, the drivers and the software that originally came with your notebook.

Here is an info link for how to use the utility.  You will need a 32 GB USB flash drive.

HP Consumer PCs - Using the HP Cloud Recovery Tool in Windows 11 and 10 | HP® Customer Support

Since you have to use the tool on another PC to create the installation media, you will need to enter your PC's product number i the tool's search window to create the recovery media.

Your PC's product number is:  1KV08UA#ABA