Laptop Power Button Blinking but Scree not turning on

[Sarvesh_04]

My Laptop HP Pavilion-15-egxxx not Turning on but the power button is blinking...and when the Adaptor is connected for charging the charging light also blinks in the same pattern. Tried multiple options...but the power button keeps blinking nothing else happes

[Hawks_Eye]

Hi @Sarvesh_04 

Welcome to the HP Support Community!

Thanks for posting your query! We're here to help you get back up and running.

That sounds frustrating, but let's try a few targeted troubleshooting steps to get your HP Pavilion-15-egxxx powered on. 

Step 1: Identify the Blink Code

• Count how many times the power button blinks before pausing.
• Each blink pattern corresponds to a specific hardware issue (e.g., CPU, RAM, BIOS failure).
• You can check HP’s official blink code guide for reference.

Step 2: Perform a Hard Reset

1. Disconnect the power adapter and remove the battery (if removable).
2. Hold the power button for 15 seconds to drain residual power.
3. Reconnect the battery and power adapter.
4. Try turning on the laptop.

Step 3: Reseat RAM and Storage

1. Power off the laptop and unplug all cables.
2. Open the back panel and locate the RAM sticks.
3. Remove and reinsert the RAM securely.
4. If possible, reseat the SSD/HDD as well.
5. Restart the laptop.

Step 4: Recover the BIOS

1. Plug in the power adapter.
2. Hold Windows + B keys, then press the power button for 2-5 seconds.
3. Release the power button but keep holding Windows + B until you hear beeping sounds.
4. If the BIOS recovery screen appears, follow the instructions.

Let me know what results you get, and I can refine the approach further! Hopefully, we can get your laptop running again.

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Take care, and have an amazing day!

Regards, 

Hawks_Eye

[Sarvesh_04]

I Gave it to Servicing Person....The Laptop was running fine From the Last 2 days...But Again today it has stopped working with Same issue...The light continuously blinks  with a break of 4 seconds Approx 

[Hawks_Eye]

@Sarvesh_04 

We sincerely thank you for your patience and co-operation during this troubleshooting process.

I'm sending you a private message to guide you on the next steps.

If this resolves your issue, kindly mark this post as "Accepted Solution" and click "Yes" if it was helpful.

Take care and have a great day!

Regards,

Hawks_Eye