Makes continuous Beep sound when I press power button and starts windows.

[Ariful96]

My HP 15-da1021tx laptop makes continuous beep sound when I press power button and starts the windows. But in safe mode it is not doing any sound when turning on.

#Recently I have faced the caps lock blinking problem 5.3 and no display and got servicing from the buyers and they said they have changed the system board for that problem. And after reeving the device I have reinstall the windows properly and installed all necessary drivers, During installation of windows the PC got several restart and never sound's continuous beeping. And also, after installation of windows I have several time shut the PC down, but never sounds continuous beep. But now I'm facing this problem.

[praveen196]

@Ariful96 Welcome to HP Community!

I understand that you are getting beep sounds.

Perform the below steps: 

If the computer does not start, the LED lights do not glow, and the display is black, 

you can perform one or more of the following actions to resolve the no power issue: 

(Click on the blue letters to get more details about each step) 

1. Examine the adapter and power cord for physical damage 

2. Test the power from the AC wall outlet to the notebook connector 

3. Start the computer using the battery only 

4. Check that the lid switch moves freely 

5. When you have completed the troubleshooting steps, there should be power available to the computer. When you press the power button, the LEDs should glow, and you should hear the sounds of the fan and the hard drive spinning. 

   • If the battery does not accept the charge or the notebook does not turn on without the AC adapter, contact HP to order a replacement battery. 

   • If the LEDs do not glow, and there are no other indicators of power being available to the computer, contact HP for technical assistance in troubleshooting a potential problem with the AC power connection or the system board. 

   • If the LEDs blink, or the computer beeps, but it does not start, go to HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot. 

   • If the LEDs glow but the computer does not start on either battery or AC power, go to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot. 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[Ariful96]

I have figured out that the problem is with one of the hotkeys, that is stuck. s

[Echo_Lake]

@Ariful96

Thank you for posting back. 

Is everything working fine, or would you require any further assistance? 

Keep me posted!