cpu fans running in high speed and no display on the monitor

[Naseerhabibit]

cpu fans running in high speed and no display on the monitor did not sloved be the linkes provided, Please kindly advise a better way to troubleshoot the problem.

[MKazi]

@Naseerhabibit

Welcome to HP Support Forums. 🙂 I came across your post and would like to help.

I understand that you have an HP computer and the CPU fan runs are a high speed and there is no display on the monitor. I appreciate the steps you have performed and have certainly done a good job.

I would like to know the following information to assist you better:

• The exact product model no. This link will help you to find the model no: http://hp.care/2bygf7l
• The operating system presently you use.
• Does the computer overheat?
• Do you see some blinking lights on the computer or hear beep codes?
• Did you connect an external monitor (if available) to the computer and check if there is display on it?

Meanwhile, I recommend you to perform the following steps to isolate the issue and arrive at a fix: 

• Press and hold the power button of the computer until it powers off.
• Disconnect the power cable and other external devices from the printer. If it is a laptop then disconnect the battery too.
• Press and hold the power button for 10 seconds and then release it. This will discharge the static from the computer.
• Reconnect the power cable and power on the computer.

If the issue persists then please perform the below steps based on the product you have:

• HP Desktop PCs - Recovering the BIOS

• HP Notebook PCs - Restoring the BIOS

I sincerely hope this fixes the issue. Please feel free to reply. Cheers! 🙂