-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Re: Secure Boot Certificate

Create an account on the HP Community to personalize your profile and ask a question
11-15-2026 11:31 AM
Computer: HP Pavilion 15-cs3075cl
Product number: 7ZZ53UA#ABA
BIOS: Insyde F.23
Problem: When Secure Boot is enabled in BIOS, the laptop fails to start Windows 11 and displays:
"Selected boot image did not Authenticate"
When Secure Boot is disabled, Windows 11 starts and operates normally.
Windows diagnostic information:
BootMgrLastUpdateError: 0x8007015E (2147942750)
BootMgrLastUpdateErrorReason: RebootRequired
UEFICA2023Status: NotStarted
The Windows boot manager is signed by Microsoft, but the firmware's Secure Boot certificate database appears to contain older Microsoft certificates.
The BIOS option "Load HP Factory Default Keys" is grayed out.
Request: Please determine whether this HP model requires a Secure Boot certificate database update, firmware repair, or other HP-approved procedure to restore Secure Boot authentication.
11-17-2026 04:49 AM
Hi @Eric425
Welcome to the HP Support Community! We're here to help you get back up and running.
Thank you for providing the complete BIOS and Windows diagnostic information.
The symptoms point toward checking Secure Boot certificate and BIOS readiness before considering a Windows reinstall or firmware repair. HP's current guidance states that Secure Boot-enabled HP Pavilion consumer PCs released in 2019 and later are supported for Microsoft's new 2023 Secure Boot certificates and should receive the certificates through Windows updates while using the latest applicable HP BIOS.
For the HP Pavilion 15-cs3075cl (7ZZ53UA#ABA):
- Keep Secure Boot disabled temporarily so Windows can boot.
- Back up important files and ensure the BitLocker/device-encryption recovery key is available, if encryption is enabled.
- Install all Windows 11 updates and restart the notebook. Repeat Windows Update until no applicable updates remain.
- Since BootMgrLastUpdateErrorReason shows RebootRequired, complete the pending restart/update cycle before evaluating UEFICA2023Status again.
- Visit HP Software and Driver Downloads, enter 7ZZ53UA#ABA, and compare the available BIOS with the currently installed F.23. If a newer BIOS is offered for this exact product, install it while connected to AC power.
- Restart into F10 BIOS Setup and enable Secure Boot again. HP documents Secure Boot configuration through BIOS Boot Options.
- If Load HP Factory Default Keys remains grayed out, do not manually delete, import, or replace the PK, KEK, db, or dbx certificates.
At this point, I would not classify the system as requiring firmware repair. The preferred path is to bring the HP BIOS and Windows servicing fully current and then retest Secure Boot.
If“Selected boot image did not Authenticate” remains afterward, please provide the resulting BIOS version, Windows build, updated UEFICA2023Status, and the status of Load HP Factory Default Keys.
This keeps the troubleshooting focused on the supported Secure Boot certificate path while avoiding unnecessary changes to the firmware trust database.
Take care, and have an amazing day!
Regards,
Hawks_Eye
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.