-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Re: Stuck on secure boot authorization number during boot

Create an account on the HP Community to personalize your profile and ask a question
03-13-2017 12:08 PM
Hi all
I wanted to change Secure Boot to disabled, but after reboot I'm stuck on this message:
Secure boot
A request has been made to change this system's secure boot configuration.
which may affect the secure boot keys and/or disable secure boot.
Please type in and enter the below number for authorization.
0124
I've tried two different keyboards (that worked previously), but it doesn't accept / register anything I type... so the only thing I can do is to hit the power button to turn the computer off, turn it back on and end up on the samme message (different code, though)
- Tags:
- HP Elite x2 1012 G1
- Microsoft Windows 10 (64-bit)
- Para solucionarlo quite un conector pequeño azul que se encuentra en los lados de la placa madre. No sé si en tu mismo modelo función a igual pero es una llave azul rectangular que conecta 2 pines si la quitas hacia arriba te funcionará✨
- Traslate yo English please:
03-13-2017 02:12 PM
Hi,
Often, when changing the secure boot state, there will be no display of the numbers you type - if you haven't already done so, try typing the secure boot pin and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP