-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- my hp victus is not turning on and the power button is blink...

Create an account on the HP Community to personalize your profile and ask a question
04-20-2025 09:36 AM - edited 04-20-2025 09:36 AM
@saifu123, Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
Since the power button is blinking and there's no charger light, that usually points to one of these problems:
Basic Checks First:
- Remove External Devices
- Disconnect USB drives, external monitors, and other accessories.
- Perform a Hard Reset (try this first)
- If the battery is non-removable:
- Unplug the charger.
- Press and hold the power button for 15-30 seconds.
- Then, plug in the charger and try turning it on.
- If the battery is removable:
- Remove the battery and AC adapter.
- Press and hold the power button for 15 seconds.
- Reconnect the battery and charger, then turn it on.
- If the battery is non-removable:
Check the Charger and Port
- Use a different compatible charger if available.
- Examine the DC-in port for looseness or damage.
- Check the charger’s LED (if present). If it doesn’t light up on any laptop, the charger may be dead.
If Still Not Working: Try These
- BIOS Recovery Attempt
- Turn off the laptop.
- Press and hold the Windows + B keys, then press and hold the Power button for 2-3 seconds.
- Release the power button but keep holding Windows + B for 10-15 seconds.
- If BIOS recovery works, you’ll hear beeps or see a screen light up.
- Inspect for Short Circuits
- If the laptop stopped working suddenly after a power outage or update, there might be a motherboard or power rail issue.
If Nothing Works...
Given that:
- No charging light shows up
- Power button blinks but no display or fan activity
- It's not responding to hard reset or BIOS recovery
Then you’re likely dealing with:
- Motherboard failure
- Faulty DC-in board or charging circuit
- RAM or other replaceable component error (depending on blink code)
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Select "Yes" on the bottom left to say “Thanks” for helping!
Max3Aj
HP Support
05-12-2025 02:32 PM
Hello Saifu123. I have recently had a similar issue. The issue with mine was the motherboard was water damaged and fried. I would check around the motherboard for seemingly burnt areas, but this may be a different issue.
Have a great day!