-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Re: reboot looping
Create an account on the HP Community to personalize your profile and ask a question
07-07-2021 04:27 PM
i tried updating it and wiping it completely but it got stuck at 64% and it won’t stop updating and restarting and nothing is working!
Solved! Go to Solution.
Accepted Solutions
07-07-2021 04:47 PM
I seriously doubt you really tried to "wipe" it -- as that requires special software to so. If you were trying to factory reset it, that does NOT wipe the drive.
I can certainly understand the desire to do factory resets -- given the prevalent view that such an action, though extreme, will fix a variety of mysterious problems and return a troublesome PC to working condition.
Problem is -- that very often is NOT the case and if there is any hardware issue at all, which is nearly always the cause with a SLOW PC (which is why most folks do the factory resets), you end up trashing your PC and rendering it useless. So, you trade a SLOW PC for a non-working PC. Not a good trade -- and certainly not what you intended.
In addition, if you start the reset and it does not complete but hangs or crashes before done, that is almost certainly an indication of a failing drive.
So let's check for the drive failing, if your PC is new enough to support UEFI, you can use these steps to test the drive: http://support.hp.com/us-en/document/c00439024
If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.
If the test will not run or if it fails, that indicates that your drive has failed and would need to be replaced.
I am a volunteer and I do not work for, nor represent, HP
07-07-2021 04:47 PM
I seriously doubt you really tried to "wipe" it -- as that requires special software to so. If you were trying to factory reset it, that does NOT wipe the drive.
I can certainly understand the desire to do factory resets -- given the prevalent view that such an action, though extreme, will fix a variety of mysterious problems and return a troublesome PC to working condition.
Problem is -- that very often is NOT the case and if there is any hardware issue at all, which is nearly always the cause with a SLOW PC (which is why most folks do the factory resets), you end up trashing your PC and rendering it useless. So, you trade a SLOW PC for a non-working PC. Not a good trade -- and certainly not what you intended.
In addition, if you start the reset and it does not complete but hangs or crashes before done, that is almost certainly an indication of a failing drive.
So let's check for the drive failing, if your PC is new enough to support UEFI, you can use these steps to test the drive: http://support.hp.com/us-en/document/c00439024
If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.
If the test will not run or if it fails, that indicates that your drive has failed and would need to be replaced.
I am a volunteer and I do not work for, nor represent, HP
Didn't find what you were looking for? Ask the community