• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP Pavilion 15-p060sr
Microsoft Windows 10 (64-bit)

Hello everyone.for last 4 or 5 months my  HP Pavilion 15-p060 has faced sleep and shut down problems.After heating to some extend,when i try to shut down my pc,display goes blank but fan is still running inside,and led is open.Moreover,when i close the lid and open after,again the same problem pc does not wake up from sleep mode sometimes and i can not get into bios screen either when i turn it on.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi,

 

Try the following.

 

Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane.

 

In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and restart the notebook.

 

When windows has reloaded, download the latest IMEI driver directly from Intel on the following link, unzip the package and run the installer.

 

https://downloadcenter.intel.com/download/26127/Intel-Management-Engine-Consumer-Driver-for-Intel-NU...

 

When the installation has completed, restart the notebook.

 

When the machine has reloaded, re-enable Fast Start-up and reboot the notebook once again - let Windows fully load for a few minutes before checking.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

View solution in original post

1 REPLY 1
HP Recommended

Hi,

 

Try the following.

 

Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane.

 

In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and restart the notebook.

 

When windows has reloaded, download the latest IMEI driver directly from Intel on the following link, unzip the package and run the installer.

 

https://downloadcenter.intel.com/download/26127/Intel-Management-Engine-Consumer-Driver-for-Intel-NU...

 

When the installation has completed, restart the notebook.

 

When the machine has reloaded, re-enable Fast Start-up and reboot the notebook once again - let Windows fully load for a few minutes before checking.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.