• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
Locked

‎06-12-2020 03:45 PM

HP Recommended
Product: HP OMEN X2S 6UA82UAR
Operating System: Microsoft Windows 10 (64-bit)

Just bought a refurb HP Omen X2s with a 500GB NVMe SSD, it has a second slot for another NVMe drive but when I put a 1TB WD Black SN750  and it doesnt detect that it's even in it. Checked Disk Management, ran diskpart from CMD and nothing shows up but the main drive.

1 ACCEPTED SOLUTION

Accepted Solutions

‎06-12-2020 07:05 PM

HP Recommended

Update:

I switched the original internal SSD to the second slot and installed the 1TB to the first one, and then it shows up normally now as a second drive, not sure what difference it all made but the problem is solved. Also my bios doesn't give any RAID options that I was able to configure.

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3

‎06-12-2020 04:36 PM

HP Recommended

@Drakoto 

 

The second slot is for RAID 0 configuration, normally you need same size with the first slot. 

 

But your machine only has one drive now, you should be able to install extra drive. May be you have to disable RAID 0 from BIOS.

 

Please use the following guide.

 

          http://h10032.www1.hp.com/ctg/Manual/c03577716

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




Was this reply helpful? Yes No

‎06-12-2020 07:05 PM

HP Recommended

Update:

I switched the original internal SSD to the second slot and installed the 1TB to the first one, and then it shows up normally now as a second drive, not sure what difference it all made but the problem is solved. Also my bios doesn't give any RAID options that I was able to configure.

Was this reply helpful? Yes No

‎06-13-2020 12:47 AM

HP Recommended

@Drakoto 

 

Very interesting. Looked like the first time you did not seat them properly.

 

My theory anyway.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.