-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Add memory to HP 250 G3

Create an account on the HP Community to personalize your profile and ask a question
08-27-2014 09:27 AM
Hello.
I have HP 250 G3 notebook with 4gb RAM, and i need to add one more 4gb RAM module. How i can do it?
Solved! Go to Solution.
Accepted Solutions
08-27-2014 09:52 AM
Sorry...try this link and look for Service and maintenance information:
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***
08-27-2014 09:37 AM
Hi
MEMORY
Standard
DDR3L SDRAM (1600 MHz/1333 MHz)*
One SODIMM slot supporting single channel* SODIMMs
Standard memory up to 8192MB
Maximum
Upgradeable to 8192 MB with optional 8192 MB* SODIMM in slot 1
* Maximum memory speed supported is 1600 MHz, but it will be downgraded to 1066 MHz for systems running the Celeron
N2815 processor.
NOTE: Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to
ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.
*Maximum memory capacities assume Windows 64-bit operating systems or Linux.
Check page Component replacement procedures 69 how to replace the memory also part number has been given.
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04212024
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
08-27-2014 09:37 AM
Here is the link to service manual of your product which has the memory replacement procedure and also the upgrade information:
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***
08-27-2014 09:46 AM
@Vidya wrote:Here is the link to service manual of your product which has the memory replacement procedure and also the upgrade information:
it's answer: invocation_failed_error
08-27-2014 09:52 AM
Sorry...try this link and look for Service and maintenance information:
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***
11-26-2014 03:43 PM
Hi, i have a similar problem with HP 250 G3 J4R74EA. Basic mounts 2Gb of ram PC3-12800 HMT425S6AFR6A-PB. I can't find a compatibilty RAM 4GB ( i have only 1 slot for ram), i have try with ADATA 4GB 2RX8 PC3-12800S-11 DDr3 1600 CL11 but no function (i tried if inserted well).
How can I find the right model ? thanks
06-18-2015 10:28 AM - edited 06-18-2015 10:29 AM
One question: How can I find out if my machine has one or two memory slots without opening it up?
I have a HP 250 G3 Notebook PC, but the Service and Maintenance manual says [on page 10]
"1 or 2 customer-accessible/upgradable memory module slots (depending on model)."