BIOS Setup utility

[ejdhd]

So, I go to the BIOS setup utility (ESC +  F10) then I go to enable legacy support and when I save it and go back to BIOS setup utility. I can see that the changes didn't save. I tried updating my bios but didn't work. any suggestion on how I can fix this?

[Riddle_Decipher]

@ejdhd Let's perform a power reset as per HP standards:

• Ensure your laptop is OFF.
• Unplug all the external devices (If any).
• Disconnect the power charger from the computer, and remove the battery.
• Press and hold the power button for about 30 seconds.
• Connect the power supply (power adapter).
• Press the power button to turn on your laptop.
• Then put your battery back.

for more details: Click here

Once done, check if the BIOS setup functions to save works, if it doesn't, I suggest you perform a bios recovery: click here for steps and let us know if that worked.

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!