Battery Failure

[Trexy43]

I can use my laptop fine as long as it is plugged in but as soon as I unplug it from the power source my computer immediately dies.

[praveen196]

@Trexy43 Welcome to HP Community!

I understand that you are unable to charge the battery.

Do not worry. I will try to fix the issue.

I have a few steps listed below that should help you resolve this concern: 

Unplug the charge and use the laptop until the battery drains to 15%. 

Turn off the laptop and turn it back on after 30mins. 

Reinstalled Microsoft ACPI-Compliant Control Method Battery under device manager: 
1) In the search box, type and open “Device Manager”.  

2) Expand “Batteries”.  

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.  

4) Click on “Uninstall”.  

5) At the prompt put a check in the box to remove the current driver  

6) Shutdown the computer.  

7) Remove the battery for minute and then put it back in.  

😎 When the computer comes back up it should automatically find the driver.  

9) Go to Device Manager.  

10) Expand Batteries.  

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software"  

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.  

Restart the computer and the issue should be fixed. 
 

Please update the BIOS.

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!