• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Troubleshooting screen flickering issue on HP notebooks: Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
Pavilion 15-au620TX
Microsoft Windows 10 (64-bit)

My Laptop's battery doesn't charges fully. It stops at around 65-66%. It recognises that it's been plugged in and charging, but it doesn't charge beyond it even being connected for hours. It's an irremovable battery. Kindly provide your suggestions in getting it sorted out.

 

Thanks.

1 REPLY 1
HP Recommended

@Ankith112 I have a few steps listed below that should help you resolve this concern:

Unplug the charge, Turn off the laptop and turn it back on after 30mins.

Reinstall Microsoft ACPI-Compliant Control Method Battery under device manager:

1) In the search box, type and open “Device Manager”.

2) Expand “Batteries”.

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

4) Click on “Uninstall”.

5) At the prompt put a check in the box to remove the current driver

6) Shutdown the computer.

7) Remove the battery for a minute and then put it back in. (Skip this step if you have a non removable battery)

8 - When the computer comes back up it should automatically find the driver.

9) Go to Device Manager.

10) Expand Batteries.

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

12) Click "Search automatically for updated driver software"

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.

 

If the issue persists, run a battery and adapter test using the steps mentioned in this link: Click here

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day! 

Riddle_Decipher
I am an HP Employee


Learning is a journey, not a destination.
Let's keep asking questions and growing together.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.