• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
Example: Pavilion au640tx
Microsoft Windows 10 (64-bit)

Battery not charging above 60-61%. generally gets stuck at this percentage. It still shows it's charging but doesn't gets above this percentage. I recently have changed my battery socket. Got this problem after that, Kindly help

-Thank You

1 REPLY 1
HP Recommended

@Hardik_

 

Welcome to HP support community.

 

I have a few steps listed below that should help you resolve this concern: 

Unplug the charge and use the laptop until the battery drains to 15%. 

Turn off the laptop and turn it back on after 30mins. 

Reinstalled Microsoft ACPI-Compliant Control Method Battery under device manager: 
1) In the search box, type and open “Device Manager”.  

2) Expand “Batteries”.  

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.  

4) Click on “Uninstall”.  

5) At the prompt put a check in the box to remove the current driver  

6) Shutdown the computer.  

7) Remove the battery for minute and then put it back in.  

😎 When the computer comes back up it should automatically find the driver.  

9) Go to Device Manager.  

10) Expand Batteries.  

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software"  

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.  

Restart the computer and the issue should be fixed. 

 

You can also refer this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.