cancel
Showing results for 
Search instead for 
Did you mean: 
RahulAnto
New member
1 0 0 0
Message 1 of 2
493
Flag Post

Battery not charging more than 70%

HP Recommended
HP Notebook-15s
Microsoft Windows 10 (64-bit)

Hi, I started to face problem related to battery charging, I think after a bios update battery is not charging beyond 70%.

When I check the latest BIOS for my laptop, the available one is F.41 version but dono how in world BIOS version of F.55 is running in my laptop now. I tried all the available options by reading in HP forum and HP support but none of them worked.

Tried to roll back the BIOS version but failed, tried to reinstall the old version but not supporting, tried through USB boot and didnt work. 

 

Later on I thought I should update to Windows 11, but that also didn't work, now using Windows 11 but still cant charge my laptop beyond 70%, if i switch off the supply and on then it will increase 1% charge and then stops like this it varies from 68% to 75% now. Mine is Just 15 months old laptop, all diagnostics shows battery is healthy and no system issues diagnosed.

 

Please give me some solution.

 

 

1 REPLY 1
praveenbv
HP Support Agent
HP Support Agent
6,087 6,085 267 342
Message 2 of 2
Flag Post
HP Recommended

Hi@RahulAnto,

 

Welcome to the HP Support Community!

 

Don't worry as I'll be glad to help, 

 

I understand that you have an HP Notebook-15s and the battery charges till 70% and then stops. You've done a remarkable job performing the steps. 

 

Did any software changes or updates happen on your laptop after which the battery stopped charging at 70%?

 

While you respond to that, I recommend you to perform the following steps to isolate the issue and arrive at a fix: 

NOTE: You may skip any steps that have been performed by you already.

  • Power off the laptop.
  • Remove the battery out. If the battery is integrated and does not have a latch to release it then leave the battery inside the laptop.
  • Disconnected AC adapter from the laptop.
  • Press and hold the power button for 15 seconds.
  • Reconnect the battery and plug the AC adapter.
  • Power ON the laptop.

Now let us uninstall the battery drivers and reinstall them. The following steps will help:

  • Open the device manager. 
  • Expand "Batteries". Right click on the ACPI battery drivers and select uninstall. If there are multiple entries of the ACPI battery drivers then uninstall them all.
  • Close the device manager.Restart the laptop.
  • The Windows operating system will reinstall the battery drivers while restarting. 

It is a good idea to download and run a BIOS update for your laptop via this link. The charger must be connected until the BIOS update is complete to avoid any power interruptions due to battery draining out. 

 

Post a successful BIOS update,  you may check if the battery charges fully. If not then please perform the steps as described in detail in this HP document. These steps help in testing and calibrating the battery. 

NOTE: Please skip the steps mentioned in "Test and calibrate the battery using HP Support Assistant".

 

I sincerely hope this fixes the issue. Keep me posted. 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation