• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Notebook 15-db0069wm
Microsoft Windows 10 (64-bit)

Hello, I just have a dvd driove and wish to upgrade to a blu ray player/ maybe burner but not sure what to get or where to even start . Been trying to find if I have a 9mm or 9.55mm thickness. Any specs, suggestions or advice would be appreciated. 

1 REPLY 1
HP Recommended

Here is your Service manual:

 

Manual

 

DVD drive is a 9mm try load so you will have to find a BD reader or burner that is 9mm a 9.5 will not quite fit. 

 

Pages 32-34 of the Manual show how to remove and disassemble your existing drive. You can simply substitute in the Blu-Ray drive and put all the mounting pieces and faceplate on the replacement bare drive. Bare drives are available on eBay; HP did not offer a Blu-Ray option on this model series so there is no ready-made complete assembly you could get. 

 

https://www.ebay.com/itm/NEW-Panasonic-UJ273-9mm-SATA-Blu-Ray-Burner-BD-RE-BDXL-DL-100G-120G-Writer-...

 

Post back with any other questions and please accept as solution if this is the info you needed. 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.